Anon Deleted Posts : Location : Status : Offline
|
Genorator
Hi to all,
When my old generator packed up I was lucky enough to be given one which was the same model as my own for spares, but since robbing it to get mine going I decided to take a look at the spare one and see if I can get it up and running.
And all signs are good everything checks out from the magneto through the switch to the low tension wiring and high tension cable to the spark plug, valves and compression are good.
So this battered and twisted hulk can be brought back to life, all it now needs is a starter pulley to replace the spring recoil gismo on the magneto and it should be back in service.
So the plan is to weld on a suitable sized pulley that would take a cord pull to get it started, job for tomorrow!!
doujoy
----------------------
|